Grey Injection Mold Components Stool PP Material Single Cavity LKM Base

Household / Industrial Plastic Products Grey Molded Plastic Stool PP Material

Description:

How We Qualify Injection Mould:

1.After enquiry received , our engineers will analyze the drawing or samples and exchange the opinion about the potential difficulty or invisible problem . If needed , we will suggest right solution accordingly to make good plastic products while cutting cost.

2. Our quotation will be worked out after the initial mould design or products requirements are clear . In another words , both of two parties will understand whether the project is workable and what the right solution is before the price come out.

3. After order confirmed and the deposit received , our engineer will offer an analysis , in which customers will get the information including gate location , ejector pin location and other design details . For complex products , or large size products , especially those need hot runner , we will adopt mold flow analysis which can predict the potential defective or flaw ,by simulating the injection molding processes , as shown in the picture below . In this way,customers will know the product condition before the mould making. Only after design approved,mould making can be started .

During the mould making process , we will apply the precision machines , for example , CNC machining , EDM , especially , the 2.5 dimension measuring to check the electrode , parts , and products . In this way , we will find out the unexpected mistake in advance . In another words , it allows us to provide the good quality while saving the time and cost .

Our in - house injection department will test the mould by injecting the samples . The final qualified samples will be sent out to customers for approval.